Impressions Chicago hardwood flooring features high quality select grade oak flooring, Brazilian cherry flooring & teak flooring in engineered and solid platforms. The Impressions hardwood floor line is broken down into 5 collections that each emphasize select grade flooring at its finest. The flooring line features Smooth finishes & hand-scraped surfaces in their product collections and colors that are nationally picked as the hottest colors on the market. Each collection has a specific reason it is in the line.
The Cape Cod series is the front runner in this flooring line. The Cape Cod hardwood collection features 3/4″ Thick solid Oaks & Brazilian cherry hardwood in widths of 3 ” & 2 ” for the Oaks & 3 1/4″ & 5″ for the Brazilian Cherry. The Select Grade hardwood is imperfection free with no signs of mineral streaks, knots or other bad features such as warping or poor milling. The Cape Cod Collection features an Aluminum Oxide finish that is free of pitting. The surface is so smooth on the Cape Cod that it puts many other high end brands finishes to shame. The Cape Cod Collection features a eased edge and square butt joint as many prefinished hardwood floors on the market today, carries an amazing 50 year warranty for finish and lifetime structural warranty. Cape Cod is produced from a renewable farm and is a green hardwood product that produces only a mere 3% waste factor and is constructed out of Appalachian Oak. This hardwood floor is capable of being sanded & refinished for a lifetime. One feature that stands the Cape Cod oaks apart from the rest of the Prefinished market is the fact that it is harvested & made in the USA. The Brazilian Cherry hardwood is harvested from a managed forest that is Lacey Act Compliant. The Brazilian Cherry of the Cape Cod collection is a TRUE clear grade hardwood floor and is guaranteed to have no Silica. The Cape Cod is just one of the 5 products in the Impressions Hardwood Flooring Line.
Another force to reckon with in the prefinished hardwood line is the Hampton Series. The Hampton Solid Hardwood Flooring line features 3/4″ Thick 6 – sided sealed Oak flooring that has square edged & ends just like a floor that is laid in unfinished than site finished. The 6 sided seal improves the moisture resistance in this flooring product dramatically and achieves the best square edge product on the market today. The Hampton series is available in 5 colors: Natural, Saddle, White Oak Natural, Honey & Gunstock. The color choices for the Hampton series are based off of the top 5 colors selling in the country today by designers & builders. The Six Sided seal is a feature ONLY available in the Hampton series anywhere in the world and is provided by Ten Oaks of Virginia. The finish on this hardwood product is a UV Cured urethane as well as aluminum oxide on the top of the product, and is pre-sealed on all six sides. The Hampton Series is a green product that is produced from Appalachian Oak and can be sanded & finished for a lifetime. The Hampton Series like the rest of the Impressions hardwood flooring line features a 50 year warranty for finish and a lifetime structural warranty. The Hampton Series is produced by a AHMI Member which is a sustainable hardwood forest product. This product is available in a 2 ” & 3 ” wide product.
The next product in the Impressions hardwood flooring line is a top selling 1/2″ thick engineered hardwood called the Salem Series. The Salem series features a Perma-Finish Commercial Grade Water Based finish and is stocked with only Prime Select Grade oak products. The Salem Series has Red Oak & Brazilian Cherry as species available to the name and can be installed below, above & on grade. The Salem Series is an engineered hardwood floor with a hardwood base panel & 2mm thick sawn face wear layer for Oaks & 1.4mm for the Brazilian cherry. The Perma-Finish, being that it is a water base, allows the true coloring of the grain to show through and shine and is added protection against scratching. This product features boards of 1′-4′ and an average board length of 31″ making it a longer plank than most engineered wood flooring on today’s market. The edges on this product are a 4-sided micro bevel and prevent chipping at the edges while defining the edge of each board. This environmentally friendly hardwood leaves a smaller carbon footprint on the planet due to less waste & less use of domestic trees in the creation of this floor. This is a very thick engineered hardwood and may be sanded and recoated many times over the life of this floor and will last many years. This product is only available in 3″ widths for both the Oaks & Brazilian cherry floor. This product can be easily installed either by Glue, Nail or Staple down. The Brazilian Cherry is Lacey Act Compliant being harvested from forests that are used solely for hardwood flooring purposes.
The next engineered collection by Impressions Hardwood is the Traditions Series. This collection brings engineered hardwood flooring to the market with a hand-scraped surface. The Traditions series is a 6″ wide by 1/2″ thick engineered hardwood with a 2mm sawn face wear layer available in oak or plantation teak. This product is finished with a commercial grade Perma-Finish water based finish to pull the look of the hardwood through the finish to the homeowners view. This artisan hand-scraped finish is done perfectly with no rough ridges, just nice smooth rolling scrapings. The Traditions series Oaks are colored in Rocky mountain or Yellowstone which are two of the most beautiful dark brown colors in the flooring market today, and the Plantation Teak is natural in color. The Teak is a lacey Act Compliant Vintage grade that is hand-picked for a quality floor for the new owner. The Oak is a Vintage Red Oak that is custom crafted for an Old World look and is hand-picked to give this floor the look you want in a nice rustic atmosphere. This product just like the rest of the Impression line sports a 50 year finish warranty & a lifetime Structural warranty. The construction of this product is a hardwood base panel to go along with the thick 2mm wear-layer that can be sanded & refinished 1 time.
The final product in the Impressions hardwood flooring line is the 3/4″ thick solid hardwood floor Classic Series. The Classic Series features a Hand-scraped surface and 3 colors of oaks to choose from. The Wheat Color available in this line is an extremely popular color that is a light coloring over natural and pulls on neutral tones to look great in any room. This product is 3/4″ Thick solid hardwood floor and 5″ wide with all 4 sides beveled to define the board. The Classic series features a Vintage Grade white oak hardwood custom selected to reflect the old world look and rustic styling. The Classic series carries a 50 year finish warranty & lifetime structural warranty and can be installed on or above grade. Each plank in this collection is hand crafted individually and is plantation grown making this a green hardwood flooring product. The finish on this product is a water based finish called Perma-Finish, which is a commercial grade finish that shows the grain in the hardwood underneath with more vivid coloring and when scratched doesn’t show coloring from the finish. This product is milled from 1 foot to 7 foot lengths with an average board length in the 4 foot range, making this a long board product that is great for large expanses.